Engineering Resources by Location
MEP Engineering Services in Daytona Beach, Florida
BEED Engineering provides mechanical, electrical, and plumbing engineering for commercial buildings, data centers, schools, and food-service projects in Daytona Beach and Volusia County.
Reviewed by
Michael K. Frempong, PE, LEED AP
President & Principal Engineer, BEED Engineering
Published October 27, 2026
Michael K. Frempong is a professional engineer and LEED AP accredited professional with over 20 years of experience in consulting engineering. As President & Principal Engineer at BEED Engineering, he leads the firm’s MEP design and consulting work for laboratory, healthcare, industrial, data center, education, commercial, municipal, and other building projects throughout Florida.
View BEED team profileMEP Engineering Services in Daytona Beach
BEED Engineering provides MEP engineering for Daytona Beach and the rest of Volusia County from its Palm Bay headquarters. There is no Daytona Beach office.
The published work in this county is not one building type. FPL Data Center is an 8,000-square-foot data center in Daytona. Holly Hill Middle School is a 53,345-square-foot school addition in Holly Hill. Domino's Port Orange is a 1,400-square-foot restaurant in Port Orange. Daytona, Holly Hill, and Port Orange are separate cities. This page does not move them into Daytona Beach.
Owners, architects, contractors, and facility managers can start with mechanical engineering, electrical engineering, and plumbing engineering, then contact BEED with the actual building.
Mechanical Engineering
Mechanical engineering is the discipline all three Volusia projects share, and the systems are not alike. The Daytona data center uses packaged HVAC, a pressurized raised floor, hot-aisle and cold-aisle layout, exhaust, and FM-200 fire suppression in the equipment spaces. Holly Hill uses an air-cooled packaged chiller plant, energy-recovery units, and demand-based ventilation for classrooms. The Port Orange restaurant uses rooftop HVAC and kitchen hood exhaust. See What is HVAC engineering? and What is a chilled water system?.
Electrical Engineering
Electrical engineering is documented on the Port Orange restaurant: lighting, occupancy sensors, a main disconnect, and electrical panels. The FPL data center and the Holly Hill addition do not list electrical engineering in their published scopes. A Daytona Beach project that needs power design is scoped to that building. It is not assumed from the data center case study.
Plumbing Engineering
Plumbing engineering on the Holly Hill addition is low-flow fixtures tied to the LEED Silver systems list. On the Port Orange restaurant it is a grease trap, water-efficient fixtures, and an instant gas-fired water heater serving a production kitchen. The data center case study does not include plumbing engineering.
Industries We Serve
Published Volusia projects support three industries:
- Data centers: the FPL facility in Daytona, mechanical engineering only
- Education: Holly Hill Middle School, mechanical and plumbing engineering for a LEED Silver addition
- Food service and commercial buildings: Domino's in Port Orange, a full MEP package
Healthcare, laboratory, and municipal examples in BEED’s archive are concentrated in Brevard County and Orlando. They show the firm’s range. They are not Volusia project locations.
Engineering Projects in or Near Daytona Beach
Cards show the project name, the city where the building is located, the industry, and the engineering disciplines on that assignment. Each one links to the full case study. BEED Engineering’s office is in Palm Bay.
Nearby projects
BEED has not published a case study located in Daytona Beach. These projects are in nearby cities. The location on each card is where the work actually occurred.
BEED Engineering
Data Center
FPL Data Center
Daytona, Florida · Mechanical Engineering
Data Center
FPL Data Center
Daytona
Daytona, Florida
8,000 SF
Mechanical Engineering
Mechanical engineering for an 8,000-square-foot data center in Daytona, Florida, with packaged HVAC, raised-floor air distribution, and FM-200 fire suppression.
View Project →
Food Service
Domino's
Port Orange
Port Orange, Florida
1,400 SF
Mechanical + Electrical + Plumbing
MEP engineering for a 1,400-square-foot Domino's restaurant in Port Orange, Florida, with customer, production, storage, and walk-in cooler spaces.
View Project →BEED Engineering
Education
Holly Hill Middle School
Holly Hill, Florida · Mechanical + Plumbing Engineering
Education
Holly Hill Middle School
LEED Silver Addition
Holly Hill, Florida
53,345 SF
Mechanical + Plumbing Engineering
Mechanical and plumbing engineering for a 53,345-square-foot LEED Silver middle school addition in Holly Hill, Florida, including an air-cooled chiller plant and demand-based ventilation.
View Project →Why Work With BEED Engineering?
Volusia County is already in BEED’s published work, and the three buildings are different enough to be useful: a mission-critical mechanical design, a school chilled-water addition, and a small restaurant with kitchen exhaust and grease waste. The case studies keep Daytona, Holly Hill, and Port Orange as the cities where the work occurred.
BEED designs those project types from Palm Bay. Daytona Beach is a service area, not a second office. Discuss a project with the building location and the disciplines the job actually needs.
Engineering topics for this market
Local pages connect to the services and questions owners actually search — not every discipline-city combination.
Related Engineering Questions
What Is MEP Engineering?
MEP engineering is the coordinated design of mechanical, electrical, and plumbing systems that make a building usable, safe, and efficient.
What Is HVAC Engineering?
HVAC engineering is the design of heating, ventilating, and air-conditioning systems that control temperature, humidity, ventilation, and indoor air quality.
What Is a Chilled Water System?
A chilled water system uses a chiller to cool water that is pumped to air-handling units and other coils, then returned to the plant to be cooled again.
What Is Plumbing Engineering?
Plumbing engineering is the design of domestic water, sanitary waste, storm drainage, and specialty piping systems for buildings.
What Is Commercial Electrical Engineering?
Commercial electrical engineering is the design of power, lighting, emergency systems, and fire alarm infrastructure for non-residential buildings.
Frequently Asked Questions
Does BEED Engineering provide MEP engineering in Daytona Beach?
Yes. BEED provides mechanical, electrical, and plumbing engineering for Daytona Beach and Volusia County from its Palm Bay headquarters. The firm does not have a Daytona Beach office. Published Volusia work is an FPL data center in Daytona, Holly Hill Middle School in Holly Hill, and a Domino's restaurant in Port Orange. Those are three different cities.
What types of projects does BEED support in the Daytona Beach area?
The published record is a data center, a school addition, and a restaurant. The data center scope is mechanical engineering. The school addition is mechanical and plumbing engineering. The restaurant is mechanical, electrical, and plumbing engineering. Scopes are not interchangeable across those buildings.
Is the FPL data center in Daytona Beach?
The published case study locates the FPL data center in Daytona, Florida, in Volusia County. It does not label the building as inside the city limits of Daytona Beach. BEED provided mechanical engineering design for that 8,000-square-foot facility, including packaged HVAC, raised-floor air distribution, and FM-200 fire suppression. Electrical and plumbing engineering were not part of that assignment.
Does BEED provide engineering for commercial renovations in Volusia County?
Commercial renovations are part of BEED’s Florida practice. The published Volusia projects are a new data center, a school addition, and a new restaurant. BEED has not published a Volusia renovation case study.
How can I request engineering services for a project in Daytona Beach?
Use the contact form or call the Palm Bay office at (321) 432-5176.
Headquarters in Palm Bay
BEED Engineering serves Daytona Beach from its Palm Bay headquarters. The map shows that office, not a location in Daytona Beach.
BEED Engineering Inc.
Palm Bay, FL
4680 Lipscomb Street NE, Suite 10H, Palm Bay, FL 32905
Local Presence
BEED Engineering — Based in Palm Bay, Serving Florida
BEED Engineering is a Palm Bay-based MEP firm providing mechanical, electrical, and plumbing design for commercial and specialized facilities throughout Central Florida and Florida. BEED Engineering is a firm you can trust to get the job done.
Need Engineering Help?
Discuss Your Project
BEED Engineering provides mechanical, electrical, and plumbing design for Daytona Beach and Volusia County projects from its Palm Bay office.